A heavy equipment maintenance program that works for a mixed fleet puts every truck, machine and attachment in one system, schedules each one on the meter that actually wears it out, and keeps DOT units and off-road units on the same work order process. Most programs break because trucks and yellow iron get run by two different systems, or by one spreadsheet nobody trusts.
- Put trucks, machines and attachments in one asset registry so nothing falls between two systems.
- Schedule each unit on the meter that wears it out: miles for road wear, engine hours for engines and hydraulics, dates as a backstop.
- Get hour meter readings at least weekly. Hours-based PM fails without them.
- A spreadsheet can still work for about 15 to 20 units out of one yard with one scheduler.
If you run dump trucks, lowboys and service trucks next to excavators, loaders and dozers, you already know the problem. The trucks have DOT paperwork and odometers. The machines have hour meters, attachments and no inspector asking for anything until something breaks on a job site. So the shop ends up with two ways of working, and the gaps between them are where the downtime comes from.
This post is for equipment managers, shop leads and operations managers who want one maintenance program for the whole fleet, not two. If you are shopping for software, our heavy equipment fleet maintenance software page shows how OptiAM handles it.
Why Do Mixed Fleets End Up With Two Maintenance Programs?
Nobody plans it that way. It usually grows like this:
1The trucks get the formal system first
DOT annual inspections and driver inspection reports force a paper trail on anything that runs on the road. That paper trail turns into a binder, then a spreadsheet, then maybe a fleet app built for on-road trucks.
2The machines live on the operator’s memory
Off-road equipment has no inspector forcing records, so service happens when the operator remembers, when the machine sounds wrong, or when the foreman calls the shop. Hour meters get read when someone thinks of it.
3Attachments and small equipment fall through completely
Buckets, breakers, augers, compactor plates, generators and light towers rarely get their own record. They move between machines and job sites, and nobody can say when a breaker was last rebuilt or where the spare thumb went.
The result is a shop that runs two processes and still misses services, because the software for trucks does not understand hours and attachments, and the spreadsheet for machines does not understand anything.
What Should One Heavy Equipment Maintenance Program Cover?
Mixed fleet: a fleet that runs on-road vehicles (subject to DOT rules) and off-road equipment (on hour meters, no DOT inspection) under one maintenance department.
A program that works for both sides covers the same five things for every unit:
- One asset record per unit, including attachments and support equipment, with location, who has it, status and full service history.
- The right meter for the wear. Miles for road wear, engine hours for engines and hydraulics, calendar dates for inspections and anything that ages sitting still.
- One work order process for trucks and machines, so a hydraulic leak on an excavator gets documented the same way as a brake job on a dump truck.
- Parts tied to the units they fit, stocked by location, so filters and wear parts are on the shelf when the PM comes due.
- Records an inspector or owner can actually follow, by unit, without anyone digging through a cab or a filing cabinet.
How Should You Schedule PM on Trucks vs Heavy Equipment?
The mistake is forcing one trigger on everything. Here is how the triggers usually split across a mixed fleet. Treat it as an example, not a manufacturer schedule. Your OEM manuals and your own failure history set the real intervals.
| Unit type | Main trigger | Second trigger | Calendar items |
|---|---|---|---|
| Dump trucks, tractors, lowboys | Miles for chassis, brakes, tires | Engine hours if they idle or run PTO | DOT annual inspection, registration |
| Excavators, loaders, dozers | Engine hours for engine and hydraulic service | None in most cases | Seasonal checks, fire suppression, cab safety items |
| Skid steers and compact track loaders | Engine hours | Track or tire wear checks | Seasonal readiness |
| Service and fuel trucks | Miles for the chassis | Hours or calendar for the body equipment | DOT annual inspection, crane or lift inspections |
| Attachments (breakers, augers, buckets) | Hours of use or job count | Visual wear checks | Annual rebuild review |
| Generators, light towers, pumps | Engine hours | Calendar if they sit | Annual load test or service |
Most machines and trucks need a “whichever comes first” rule: an hours or miles interval plus a calendar backstop, so a unit that sits all winter still gets its fluids and inspections. Our post on fleet PM by miles and hours goes deeper on setting those triggers.
How Do You Keep Hour Meter Readings Honest?
Hours-based PM is only as good as the readings. These are the failures we see most:
- Readings only happen at service. If hours are logged when the machine comes in, the system can’t tell you a PM is due. Get a reading at least weekly, or at every fuel-up.
- Meters get replaced and nobody notes it. A new meter starts at zero and the history goes sideways. Record the swap and the old reading on the unit.
- Machines on far job sites never get read. If operators can enter hours from a phone on site, they actually do it. If they have to call it in, they don’t.
- Broken meters go unnoticed. Flag any unit whose hours haven’t moved in two weeks while it was assigned to a job.
Is your equipment program still running on a spreadsheet?
The CMMS vs Excel check takes about two minutes and tells you whether your spreadsheet is still the right tool for a fleet like yours. No email required.
Why Does Preventive Maintenance Pay Off on Heavy Equipment?
The U.S. Department of Energy’s O&M Best Practices Guide estimates that a preventive maintenance program saves 12% to 18% over purely reactive maintenance. On a mixed fleet, the savings show up in fewer roadside failures and fewer machines down on a job site. Brake systems and tires were the top two vehicle out-of-service categories in CVSA’s 2025 International Roadcheck, and both are exactly what a miles-based PM catches before an inspector does.
Where Do Attachments and Small Equipment Fit?
Give anything worth more than a few thousand dollars, or anything that can hurt someone if it fails, its own record. That usually means breakers, augers, thumbs, quick couplers, compaction plates, generators, light towers, trailers and pumps.
The record does not need to be fancy. It needs a unit number, what it fits, where it is now, who has it, and its service history. That alone answers the two questions that waste the most time on a job site: where is it, and is it safe to run.
When Is a Spreadsheet Still Fine?
Be honest about this before you buy anything. A spreadsheet can still work if:
- You run fewer than about 15 to 20 units out of one yard
- One person does all the scheduling and actually keeps it current
- Your trucks are a small part of the fleet and DOT records are simple
- You don’t need techs or operators updating anything from the field
Once you have more than one yard, more than one person scheduling, or machines spread across job sites, the spreadsheet stops being the source of truth. Our fleet maintenance software vs. spreadsheets breakdown walks through the signs.
How Do You Make the Case to Leadership?
Your owner or ops director wants to know what one program buys them. Keep it to four numbers:
- Units down last month and how many days each was out
- PMs missed or late, split between trucks and machines
- Repeat repairs on the same unit within 90 days
- Time spent finding records for an audit, insurance claim or sale
Then make a small ask: start with your highest-hour machines and your DOT trucks, run them in one system for a season, and compare.
How Does OptiAM Handle a Mixed Heavy Equipment Fleet?
OptiAM is a CMMS and EAM platform built by Andromeda Systems Incorporated, the reliability and supportability engineering team that has supported DoW assets since 2005. Fleets are its core focus, including mixed fleets of trucks and heavy equipment.
- Asset Manager keeps one registry for trucks, machines, attachments and support equipment, with location, custodian, status, usage readings and maintenance history.
- Maintenance Optimizer schedules PM on miles, hours or dates and opens the work order when a unit hits its interval.
- Work Order Manager runs trucks and machines through the same process, with multi-level sign-off. A work order can’t close until every task is complete.
- OptiAM GO lets operators and techs log hours, run checklists and close work orders from a phone on the job site, with or without signal.
What it doesn’t do: OptiAM does not track labor hours, costs or invoices, and it isn’t a telematics platform. Meter readings come from your people, entered in the app. If you already run a telematics or ELD system, keep it. OptiAM holds the maintenance side.
Frequently Asked Questions
What is a heavy equipment maintenance program?
It is the set of schedules, inspections, work order steps and records you use to keep every machine and truck in the fleet safe and available. A good one schedules each unit on the meter that wears it out, documents every repair the same way, and keeps records by unit.
Can trucks and heavy equipment be managed in the same maintenance software?
Yes, as long as the software handles miles, engine hours and calendar dates on the same unit and keeps DOT inspection records alongside off-road service records. Software built only for on-road trucks usually struggles with hours and attachments.
Should heavy equipment PM be based on hours or the calendar?
Engine hours for engine and hydraulic service, with a calendar backstop for anything that ages while sitting, like fluids, batteries and safety inspections. Use whichever comes first.
How often should hour meter readings be recorded?
At least weekly, or at every fuel-up. If readings only happen at service, the system can’t warn you before a PM is overdue.
Should attachments get their own maintenance records?
Anything expensive or safety-critical should. Breakers, augers, couplers, generators and trailers move between machines and sites, so their own record is the only way to know where they are and when they were last serviced.
Does OptiAM connect to telematics?
Not out of the box. Meter readings are entered by operators and techs, usually from the OptiAM GO mobile app. A telematics integration would be a development project, so ask us about your setup on a demo.
What is the best heavy equipment fleet maintenance software?
It depends on your fleet. If you run only on-road trucks, fleet software built for DOT may be enough. If you run trucks and heavy equipment together, look for software that handles miles, engine hours and dates on the same unit, tracks attachments, works offline on job sites, and keeps one history per unit. Ask every vendor to show those four things on your own equipment.
See your mixed fleet in OptiAM
Bring your unit list, a few OEM service schedules and the people who run the shop to a 30-minute walkthrough on your own equipment. No slide deck. Or call 904-402-8641.
